0

items at £0.00

107.39

Aico EI169 Deaf Alarm with Strobe and a Vibrating Pad

£89.49 Ex. VAT £107.39 Inc. VAT
Quantity :
The Ei169 is an alarm for the Hearing Impaired that runs on 230V AC mains power, and has a built in long-life sealed Lead-acid rechargeable battery The unit is designed for use with the Ei151TL, Ei156TLH and Ei154TL Smoke and Heat Alarms The unit’s strobe and vibrating pi... Read More Info

Delivery & Collection Options...

Best Price Guarantee

Best Price WE WONT BE BEATEN ON PRICE
We regularly check our prices against our competitors, to ensure we can offer you the best deal possible.

Best Price Guarantee
Add to Job List

Aico EI169 Deaf Alarm with Strobe and a Vibrating Pad [EI169]

The Ei169 is an alarm for the Hearing Impaired that runs on 230V AC mains power, and has a built in long-life sealed Lead-acid rechargeable battery The unit is designed for use with the Ei151TL, Ei156TLH and Ei154TL Smoke and Heat Alarms The unit’s strobe and vibrating pillow pad will activate when the interconnected alarms are triggered The unit has integrated cable channels and screw slots for easy wall mounting The unit has an additional jack plug for adding an extra vibrating pillow pad or strobe. It also has a jack plug to receive a signal from compatible alarm clocks . Operation :  When the smoke or heat alarms in the system activate, the strobe will flash and the vibrating pillow pad will vibrate  The green light will illuminate to show power is present  The red light will flash and the green light will not show when it is on battery power only  Pressing the “Test” button on the side of the unit will cause the flashing strobe and vibrating pillow pad to activate

Back to top

Aico EI169 Deaf Alarm with Strobe and a Vibrating Pad [EI169]

230V AC Mains powered with built-in Rechargeable Lead-Acid battery capable of lasting up to 7 days in standby mode and has a 5 year lifespan. 2. Mains transformer, hardwired to the strobe unit by 4m of low voltage cable, and 2m of mains cable to the 13A plug. 3. Supplied with 10m of low voltage cable to link between the strobe unit and the interface pattress (supplied and to be mounted behind a 150 Series alarm). 4. Tamperproof battery compartment. 5. Green power indicator light - on constantly to confirm integrity of mains power supply. 6. When on battery only power, the red indicator light will flash. 7. Fault indicator - the strobe will flash if a fault is detected (e.g. A break in the cable linking to the alarm or a break in the cable to the vibrating pillow pad). 8. Manual Test button checks the strobe and vibrating pillow pad. 9. The strobe uses an intense Xenon tube - flashes once per second (1Hz). 10. The vibrating pillow pad has a locking socket (JST type VHR-2N) with 5m of cable. Output is pulsed in alarm state. The cable is monitored - if the pad is not connected or damaged the strobe will flash. 11. The strobe unit has an additional socket for adding an Ei174 Additional Vibrating Pillow Pad or Ei178 Additional Strobe (not supplied). 12. Clock input socket (requires a 5 to 24V input - electrically isolated from the mains supply). A compatible alarm clock can be connected to this input socket with a 3.5mm mono jack plug. When the alarm clock triggers, the vibration pad activates, but the internal strobe or auxiliary output are not activated (to indicate to the person that it is an alarm clock activation and not a fire activation). 13. Supplied with fixing screws: suitable for wall mounting. 14. Operating temperature range: 4°C to 40°C. 0% to 90% relative humidity. 15. Dimensions: Control Panel - 105mm x 165mm x 50mm, Transformer - 60 x 70 x 50mm. Weight inclusive of packaging: 1986g.

Back to top

You might also need...

Also recommended...