0

items at £0.00

26.07

Aico EI208 Carbon Monoxide Detector

£21.72 Ex. VAT £26.07 Inc. VAT
Quantity :
  • Buy 3 for £20.45 (£24.54 incl. tax) each and save 6%

Aico Ei208 a battery powered Carbon Monoxide (CO) Detector powered by a 10 year sealed-in lithium long life battery.  A carbon monoxide detector with a high performance, proven electrochemical sensor to sense the presence of CO. The sensor is individually calibrated and tested in CO ... Read More Info

Delivery & Collection Options...

Best Price Guarantee

Best Price WE WONT BE BEATEN ON PRICE
We regularly check our prices against our competitors, to ensure we can offer you the best deal possible.

Best Price Guarantee
Add to Job List

Aico EI208 Carbon Monoxide Detector [Ei208 AICO]

Aico Ei208 a battery powered Carbon Monoxide (CO) Detector powered by a 10 year sealed-in lithium long life battery.  A carbon monoxide detector with a high performance, proven electrochemical sensor to sense the presence of CO. The sensor is individually calibrated and tested in CO gas on assembly to ensure accuracy.

Features include:

  • Twist on mounting base with multiple fixing points, so it can easily be secured to a ceiling or wall.
  • Memory feature records the last CO level sensed and can be useful to check if CO has been present if the home owner has been away.
  • Easy to use Test/Hush button allows the user to test the carbon monoxide detector. This checks all aspects of the alarm (sensor, electronics and sounder).
  • The alarm has an ‘End of life’ indicator which will notify the user when the carbon monoxide detector needs replacing at the end of its seven year of life
  • Loud distinctive alarm sound (85db (A) at 3 metres.
  • Power, alarm and fault indicator lights
  • Kitemarked to BS EN50291-1:2010
  • 5 Year Guarantee

Back to top

Aico EI208 Carbon Monoxide Detector [Ei208 AICO]

Technical Specification

Model Ei208

The CO Alarm carries the BSI Kitemark to indicate type testing to BS EN 50291-1:2010.  It is CE marked to indicate conformance to BS EN 60335-1:1994, BS EN 50270:1999 Safety and Electromagnetic Compatibility Directives.

New generation electrochemical cell type Carbon Monoxide sensor checks CO concentration every 4 seconds. Each unit is calibrated and tested in CO gas in order to ensure accuracy.

Battery powered. Sealed in Lithium battery that will power the unit for its entire life (7 years). The amber fault light will flash three times every minute with three beeps to indicate that the unit needs replacing.

Start-up sequence - the red, amber and green LEDs will flash once. Rapid warm up time - once this very short sequence has elapsed, the alarm is in full operation.

Low and high CO level indicators as follows:

CO Level Red Light Alarm

<43ppm Off Off

43-80ppm 1 flash every 2 sec Sounds after 60-90 mins

80-150ppm 1 flash every sec Sounds after 10-40 mins

>150ppm 2 flashes every sec Sounds within 2 mins

Fault indicator - amber LED flashes twice and the alarm beeps twice every minute if a fault is detected.

Manual Test/Hush button - press and hold the Test/Hush button to test circuitry, sensor and sounder. LEDs will flash as below:

Normal mode - Green LED flash with normal alarm sound

Fault condition -  Amber LED flash. Alarm will not sound

End of life -  Amber LED flash with beep

Pressing and releasing the Test/Hush button when the unit is sensing CO will silence the alarm for 4 minutes.  It will only silence once until the gas clears.  At CO levels of 150ppm and above the unit cannot be silenced due to the increased danger.

Memory feature which records the last CO level sensed. If the unit has been in alarm and then ceased, the red LED will continue to flash for a 24-hour period to indicate the level of CO sensed. Pressing the test button will also show the last CO level sensed, via the rate of flash of the red LED. As follows:

For 24 hours after the alarm has ceased

CO Level Sensed Red Light

43-80ppm 2 flashes every 50 secs

80-150ppm 4 flashes every 50 secs

>150ppm 8 flashes every 50 secs

Built in sounder to give a minimum output of 85dB(A) at 3 metres.  Modulated sound output - 3 rapid pulses followed by a ½ second pause, repeated until reset.  This easily differentiates it from a typical smoke alarm.

Automatic reset of alarm test function and after an alarm state when CO gas clears.

Supplied with integral mounting base and fixing screws. The mounting base has multiple fixing holes and the alarm is suitable for ceiling or wall mounting.

15. Operating temperature range: -10°C to +40°C.  15% to 95% relative humidity (non-condensing).

Dimensions: 120mm x 105mm x 45mm.  Weight: 180g.

5-year guarantee.

Back to top

You might also need...

Also recommended...