0

items at £0.00

22.46

Aico EI208W Carbon Monoxide Detector

£18.72 Ex. VAT £22.46 Inc. VAT
Quantity :

The Ei208W is a Carbon Monoxide (CO) Detector that is powered by a sealed-in Lithium battery. The carbon monoxide detector has a high performance, proven electrochemical sensor to sense CO presence. The sensor is individually calibrated and tested in CO gas on assembly to ensure accuracy... Read More Info

Delivery & Collection Options...

Best Price Guarantee

Best Price WE WONT BE BEATEN ON PRICE
We regularly check our prices against our competitors, to ensure we can offer you the best deal possible.

Best Price Guarantee
Add to Job List

Aico EI208W Carbon Monoxide Detector [Ei208W AICO]

The Ei208W is a Carbon Monoxide (CO) Detector that is powered by a sealed-in Lithium battery. The carbon monoxide detector has a high performance, proven electrochemical sensor to sense CO presence. The sensor is individually calibrated and tested in CO gas on assembly to ensure accuracy. The carbon monoxide detector has a twist on mounting base with multiple fixing points, so it can easily be secured to a ceiling or wall. The memory feature records the last CO level sensed and can be useful to check if CO has been present if the home owner has been away. An easy to use Test/Hush button allows the user to test the carbon monoxide detector. This checks all aspects of the alarm (sensor, electronics and sounder). The alarm has an ‘End of life’ indicator which will notify the user when the carbon monoxide detector needs replacing at the end of its seven year of life . Main Features Proven Electrochemical sensor (7 year life) Lithium battery (sealed in) Easy to use large Test/Hush button Pre alarm LED gives early warning of CO Memory feature records if Carbon Monoxide (CO) has been detected End of life indicator Loud distinctive alarm sound (85db (A) at 3 metres) Power, alarm and fault indicator lights Kitemarked to BS EN50291-1:2010 5 Year Guarantee ◄Go back to Carbon Monoxide Detectors

Back to top

Aico EI208W Carbon Monoxide Detector [Ei208W AICO]

Technical Specification Model Ei208W 1. The CO Alarm carries the BSI Kitemark to indicate type testing to BS EN 50291-1:2010. It is CE marked to indicate conformance to BS EN 60335-1:1994, BS EN 50270:1999 Safety and Electromagnetic Compatibility Directives. 2. New generation electrochemical cell type Carbon Monoxide sensor checks CO concentration every 4 seconds. Each unit is calibrated and tested in CO gas in order to ensure accuracy. 3. Battery powered. Sealed in Lithium battery that will power the unit for it’s entire life (7 years). The amber fault light will flash three times every minute with three beeps to indicate that the unit needs replacing. 4. Start up sequence - the red, amber and green LEDs will flash once. Rapid warm up time - once this very short sequence has elapsed, the alarm is in full operation. 5. Low and high CO level indicators as follows: CO Level Red Light Alarm <43ppm Off Off 43-80ppm 1 flash every 2 sec Sounds after 60-90 mins 80-150ppm 1 flash every sec Sounds after 10-40 mins >150ppm 2 flashes every sec Sounds within 2 mins 6. Fault indicator - amber LED flashes twice and the alarm beeps twice every minute if a fault is detected. 7. Manual Test/Hush button - press and hold the Test/Hush button to test circuitry, sensor and sounder. LEDs will flash as below: Normal mode - Green LED flash with normal alarm sound Fault condition - Amber LED flash. Alarm will not sound End of life - Amber LED flash with beep 10. Pressing and releasing the Test/Hush button when the unit is sensing CO will silence the alarm for 4 minutes. It will only silence once until the gas clears. At CO levels of 150ppm and above the unit cannot be silenced due to the increased danger. 11. Memory feature which records the last CO level sensed. If the unit has been in alarm and then ceased, the red LED will continue to flash for a 24 hour period to indicate the level of CO sensed. Pressing the test button will also show the last CO level sensed, via the rate of flash of the red LED. As follows: For 24 hours after the alarm has ceased CO Level Sensed Red Light 43-80ppm 2 flashes every 50 sec 80-150ppm 4 flashes every 50 sec >150ppm 8 flashes every 50 sec 12. Built in sounder to give a minimum output of 85dB(A) at 3 metres. Modulated sound output - 3 rapid pulses followed by a 1½ second pause, repeated until reset. This easily differentiates it from a typical smoke alarm. 13. Automatic reset of alarm test function and after an alarm state when CO gas clears. 14. Supplied with integral mounting base and fixing screws. The mounting base has multiple fixing holes and the alarm is suitable for ceiling or wall mounting. 15. Operating temperature range: -10°C to +40°C. 15% to 95% relative humidity (non-condensing). 16. Dimensions: 120mm x 105mm x 45mm. Weight: 180g. 17. 5 year guarantee. 18. Manufactured in Ireland.

Back to top

You might also need...

Also recommended...