Merlin Gerin Distribution Board 6Way Single Pole Type A [MGAN6 MG]Merlin Gerin Isobar 4c Metal Standard Type A Single Single Phase Distribution Board Without Incomer 125A Miniature circuit breaker distribution boards The Isobar range allows for hundreds of Distribution board combinations and can be assembled from just a few modules. Isobar 4c modules can be joined at the top, bottom or sides to make assemblies that cater for the biggest or most complex installations. The standard range includes three-phase 250A boards with up to 24 outgoing ways and single-phase 125A boards with up to 23 outgoing ways. Split-load / multi-service configurations are available as part of the standard range and all units are compatible with incoming disconnectors RCCBs and MCCBs. Compatability also extends across the C60H ranges of MCBs and RCBOs for the protection of outgoing circuits. All versions of Isobar incorporate the unique busbar connection device, which allows for a quick connection and unused ways are isolated. Isobar 4c SP&N Type A Distribution Board for use only with C60H range Technical Details: Number of outgoing ways: 6 Dimensions: H:264 x W:260 x D:127mm Designed, manufactured and tested to: BS EN 60439-3 Busbar rating: 125A Voltage rating: 230/240Vac Optional distributed neutral: Allowing 2 pole switching at any outgoing way using distributed neutral kit Ingress protection: IP31 to BS EN 60529 Cable capacity neutral and earth bar: 25mm² DIN rail mounting: With fully shrouded busbars Surface or flush mounting: Using flush mounting kit Colour: RAL 9001 epoxy powder coated Features: Fully type tested conditional short circuit rating of 16kA to BS EN 60439 High performance MCB 10kA BS EN 60898 15kA BS EN 60947-2 in B, C or D curve single and double pole 125A busbar rating Isobar connection system ensuring unused outgoing ways are isolated Option of switching outgoing neutral on all boards using distributed neutral kit Terminal block for feeding up to 100A Range of incomers: switch disconnectors, residual current devices, terminal blocks Single pole RCBO for new or retrofit maintaining device density Full range of device accessories and auxiliaries Knockouts for cable gland and conduit mixed to suit the installation needs without loss of space Split metering option
Merlin Gerin Distribution Board 6Way Single Pole Type A [MGAN6 MG]
No specification details available.