0

items at £0.00

199.92

Vent Axia HR100 Range HR100R Top Access Loft Ducted MVHR Heat Recovery Unit 370377

£166.60 Ex. VAT £199.92 Inc. VAT
Quantity :

Vent Axia HR100 Range HR100R Ducted MVHR Unit. VA 370377.

The HR100R and HR100RS are ideal for single bedrooms/bathroom applications situated in hotel rooms, nursing homes and residential care homes. The HR100R features top access and is ideal for loft installatio... Read More Info

Delivery & Collection Options...

Best Price Guarantee

Best Price WE WONT BE BEATEN ON PRICE
We regularly check our prices against our competitors, to ensure we can offer you the best deal possible.

Best Price Guarantee
Add to Job List

Vent Axia HR100 Range HR100R Top Access Loft Ducted MVHR Heat Recovery Unit 370377 [HR100R]

Vent Axia HR100 Range HR100R Ducted MVHR Unit. VA 370377.

The HR100R and HR100RS are ideal for single bedrooms/bathroom applications situated in hotel rooms, nursing homes and residential care homes. The HR100R features top access and is ideal for loft installations. The HR100RS features bottom access and is ideal for installation on the ceiling slab above a suspended ceiling. The HR100R/RS is a self-contained heat recovery unit for mounting in lofts and suspended ceilings.
The unit is supplied without controls to allow for the unit to be tailored to suit the individual requirements. Compatible with standard 100mm ducting for connection to internal grilles and external cowl. The unit comes fitted with a single 2-speed motor, and provides continuous low volume ventilation with a boost option. A variety of control devices are available for manual or automatic speed control. An integral heat exchanger transfers heat from the outgoing stale air to the fresh air supply, raising the supply air temperature whilst at the same time reducing it's relative humidity. Up to 18l/s FID capacity. The unit provides superior control of condensation and odours, ideal for bathrooms or small internal rooms.

 

Read reviews of the electricpoint service

Back to top

Vent Axia HR100 Range HR100R Top Access Loft Ducted MVHR Heat Recovery Unit 370377 [HR100R]

Installation

The HR100R is compatible with 100mm diameter flexible ducting which fits onto the unit via the metal spigots and can be fastened using tape or worm drive clips.

A 22mm diameter condensate drain connection is situated on the base of the unit, this should be connected to a suitable outlet for condensate drainage.

HR100R/RS Installation

Typical Specifications

Supply and install a HR100R Wholehouse heat recovery unit as manufactured by:

Vent-Axia Clean Air Systems
Fleming Way
Crawley
West Sussex
RH10 9YX

Performance: m³/h l/s
Max ventilation rate 66 18.3
N° speed settings 2  

Efficiency: The unit should retain up to 70% of the temperature differential of out going air.

Heat exchanger: should be of a multi plate cross-flow type constructed out of a polymeric plastic with ultra sonic welded joints.

Motor: should be a 2 speed 240V 50Hz A/C with sleeve bearings, greased for life. It shall operate up to an ambient temperature of 40°C and be fitted with a one shot thermal overload protective device.

Fan: The two polymeric fan wheels should be a centrifugal forward curve type on a common shaft.

Controls: The unit should be operated via a remote Trickle Boost switch or a humidistat. A light switch can be used providing a 'timed out' device is employed.

Ducting spigots: The unit should provide 100mm Ø x 50mm spigots for all duct connections. The unit cannot be handed. (Can be converted to flat ducting).

Filter: not fitted.

Condensation: the outlet provided should be 22mm Ø located on the underside of the unit.

Construction: the unit outer case is manufactured from white powder coated sheet metal.

Sound Levels: dB(A) @ 3m
Minimum 20.0
Maximum 30.0

Mains electrical supply: 230VAC 50Hz.

Back to top

You might also need...

Also recommended...