0

items at £0.00

249.19

Vent Axia HR100 Range HR100RS Ducted MVHR Unit 435004

£207.66 Ex. VAT £249.19 Inc. VAT
Quantity :

                            Vent Axia HR100 Range HR100RS Ducted MVHR Unit. VA 435004.

Read More Info

Delivery & Collection Options...

Best Price Guarantee

Best Price WE WONT BE BEATEN ON PRICE
We regularly check our prices against our competitors, to ensure we can offer you the best deal possible.

Best Price Guarantee
Add to Job List

Vent Axia HR100 Range HR100RS Ducted MVHR Unit 435004 [HR100RS HEAT RECOVERY]

                            Vent Axia HR100 Range HR100RS Ducted MVHR Unit. VA 435004.

Click Here To See All Vent Axia HR Range                                                                                    Have You Got Any Other Questions?question

Back to top

Vent Axia HR100 Range HR100RS Ducted MVHR Unit 435004 [HR100RS HEAT RECOVERY]

Installation

The HR100R is compatible with 100mm diameter flexible ducting which fits onto the unit via the metal spigots and can be fastened using tape or worm drive clips.

A 22mm diameter condensate drain connection is situated on the base of the unit, this should be connected to a suitable outlet for condensate drainage.

HR100R/RS Installation

Typical Specifications

Supply and install a HR100R Wholehouse heat recovery unit as manufactured by:

Vent-Axia Clean Air Systems
Fleming Way
Crawley
West Sussex
RH10 9YX

Performance: m³/h l/s
Max ventilation rate 66 18.3
N° speed settings 2  

Efficiency: The unit should retain up to 70% of the temperature differential of out going air.

Heat exchanger: should be of a multi plate cross-flow type constructed out of a polymeric plastic with ultra sonic welded joints.

Motor: should be a 2 speed 240V 50Hz A/C with sleeve bearings, greased for life. It shall operate up to an ambient temperature of 40°C and be fitted with a one shot thermal overload protective device.

Fan: The two polymeric fan wheels should be a centrifugal forward curve type on a common shaft.

Controls: The unit should be operated via a remote Trickle Boost switch or a humidistat. A light switch can be used providing a 'timed out' device is employed.

Ducting spigots: The unit should provide 100mm Ø x 50mm spigots for all duct connections. The unit cannot be handed. (Can be converted to flat ducting).

Filter: not fitted.

Condensation: the outlet provided should be 22mm Ø located on the underside of the unit.

Construction: the unit outer case is manufactured from white powder coated sheet metal.

Sound Levels: dB(A) @ 3m
Minimum 20.0
Maximum 30.0

Mains electrical supply: 230VAC 50Hz.

Back to top

You might also need...

Also recommended...