0

items at £0.00

153.6

Vent Axia Lo Carbon Tempra LP Single Room Heat Recovery Unit with Pullcord Optional Constant Trickle 403832

£128.00 Ex. VAT £153.60 Inc. VAT
Quantity :
  • Buy 3 for £124.16 (£148.99 incl. tax) each and save 4%

- TEMPRA LP LC VA 403832.

The Tempra units are designed for use in bathrooms, toilets and utility areas. The Vent-Axia Lo-Carbon Tempra LP Single Room Heat Recovery Unit is available with a constant trickle speed and with a pullcord or switch to boost airflow The units are sui... Read More Info

Delivery & Collection Options...

Best Price Guarantee

Best Price WE WONT BE BEATEN ON PRICE
We regularly check our prices against our competitors, to ensure we can offer you the best deal possible.

Best Price Guarantee
Add to Job List

Vent Axia Lo Carbon Tempra LP Single Room Heat Recovery Unit with Pullcord Optional Constant Trickle 403832 [TEMPRA LP]

- TEMPRA LP LC VA 403832.

The Tempra units are designed for use in bathrooms, toilets and utility areas. The Vent-Axia Lo-Carbon Tempra LP Single Room Heat Recovery Unit is available with a constant trickle speed and with a pullcord or switch to boost airflow The units are suitable for installation into external walls up to 460mm thick and all installations can be carried out from inside a building. To facilitate ease of maintenance and installation the Tempra's simple construction is not difficult to fit in the same location as an existing 100mm diameter fan and offers easy access to the heat exchanger for regular maintenance. Under the Building Regulations Document F, continuous running products such as the Lo Carbon Tempra are only required to move an amount of air as laid down in table 5.1a of Document F. Special Features Revolutionary patented technology Reduces your carbon footprint 80percent temperature based heat recovery Fits 100mm diameter hole Meets the Building Regulation Continuous or intermittent flow rates Low energy consumption, low noise Summer setting Controls condensation and eliminates mould.

Through-The-Wall Heat Recovery Unit
The Vent-Axia Lo-Carbon Tempra is designed to fit in 100mm diameter hole and is suitable for refurbished properties in kitchen, bathroom, toilet or utility rooms. The unit meets the performance requirements for continuous extract fans under the current Building Regulations Approved Document F.

The Tempra is available in three models, a P version with pullcord control, a T version with overrun timer and an HTP version with built-in pullcord, overrun timer and humidistat. Two spigot lengths are available; 320mm and 460mm.

The manual summer setting allows the unit to be set to extract only, helping to prevent a dwelling becoming too warm in hot summer conditions.

Performance
Tempra can be set to run continuously at 6 l/s or 9 l/s, boosting up to 15 l/s, recovering heat from extracted air and returning it to the dwelling. The unique, compact heat exchanger has a temperature efficiency up to 78%, saving energy and reducing your carbon footprint. For intermittent extract the Tempra is set to 15 l/s.

The Tempra is also designed so that the replacement air being introduced is at a reduced rate ensuring that the room being ventilated is still under a slight negative pressure. This ensures that fresh air is bought into the room from the rest of the house preventing humid air migrating.

The Lo-Carbon EC/DC motor with twin impellers consumes as little as 3.2 Watts on trickle rate and runs almost silently at only 20dB(A).

Typical Installation
The unique heat exchanger design allows the Tempra to be fitted in a 100mm diameter hole, allowing it to replace standard 100mm extract fans while giving all the benefits of heat recovery. Maximum wall thickness is 460mm.

A longer version of the Tempra is available, designed for installations where the wall thickness is between 321mm and 460mm. 460mm models are identified by an ‘L’.

Easy installation and maintenance

With simple construction Tempra is both easy to fit in the same location as an existing 100mm diameter fan, and with easy access to the heat exchanger for maintenance. 

Range Product Specification

Complies with Building Regulations Part L 2010
Low energy consumption means the Tempra exceeds the energy saving requirements in Part L, Conservation of Fuel and Power.

Versatile control
Switching on/off or from trickle to boost speeds is possible in several ways: Switched Live, Pullcord or Humidistat. Overrun and delay start timers are also available.

Summer Setting
The extract-only Summer Setting helps keep you cool by closing off the intake from outside, reducing the amount of warm air entering the dwelling.

Fits 100mm diameter hole
The Tempra will fit 100mm through the wall applications as a straight replacement for a traditional extract fan.

Continuous or intermittent flow rates
Air flows can be set to quiet, low speed continuous rates or high speed intermittent boost rates.

Low energy consumption, low noise
The unique twin impeller design consumes as little as 2.0 Watts and operates almost silently on trickle setting.

Long Life ECDC Motor
The units are fitted with a 24V ECDC motor with a state of the art built in power supply. This has the ability to operate at only 2 Watts power consumption on normal setting, offering a 90% energy saving over conventional AC equivalents

Maintenance
Apart from removing odours, providing fresh air and recovering heat, this appliance extracts airborne impurities such as dust, dirt and grease. These gradually build up and detract from the efficiency and appearance of the appliance. To ensure peak performance, the heat exchanger should be cleaned as required in accordance with the instructions supplied.

 

Click Here To See All Vent Axia Tempra Range                                                                        Have You Got Any Other Questions?question

Back to top

Vent Axia Lo Carbon Tempra LP Single Room Heat Recovery Unit with Pullcord Optional Constant Trickle 403832 [TEMPRA LP]

No specification details available.

Back to top

You might also need...

Also recommended...