MK Sentry MCB 40A H5940S, providing a single pole, single module format. H5940S provides an overcurrent rating of 40A and a short circuit breaking capacity of 6kA. For use with all MK Sentry Consumer Units and MK Sentry Enclosures.
An MCB activates on detection of an overcurrent caused by both overload and fault currents, interrupting the faulty power supply of the circuit to prevent damage to the connected electrical installation.
All MK Sentry MCBs are fitted with a 6kA breaking capacity as standard alongside a 35mm² Terminal capacity.
The operation dolly switch can be locked into either the ON or OFF position without affecting the ability of the tripping mechanism to operate. When a fault is detected it is not possible to close the contacts. The unit also provides protection via a filtering device, reducing the risk of unwanted tripping due to transient surges in the supply to the unit.
When set to the 'OFF' position a contact gap of 4mm is present, allowing for usage as an isolating switch when necessary.
Features of MK Sentry H5940S:
- H5940S was formerly supplied as MK Sentry 5940S
- Voltage: 230V
- Rating: 40 Amp
- Breaking Capacity: 6kA
- Number of modules: One
- Terminal capacity: 35mm2
- BS Number: BS EN 60898
- Height: 83mm
- Width: 18mm
- Depth: 74mm
View all MK Sentry Consumer Units
View all MK Sentry RCBO
View all MK Sentry MCB
View all MK Sentry RCD
View all MK Electric
If you just need some help, would like to take advantage of our Price Promise or perhaps have a large order to place give our team of professionals a call on 0203 994 5470, drop us an email at sales@electricpoint.com or use our Contact Form.