0

items at £0.00

2188

Dimplex Edel Hot Water Cylinder Unvented Heat Pump 200L EDL200UK

£1,823.33 Ex. VAT £2,188.00 Inc. VAT
Quantity :

Dimplex EDL200UK Edel 200 litre hot water heating cylinder, highly efficient as this electric boiler uses an air source heat pump to heat water at little cost by extracting heat from external air that is supplied through insulated ductwork (ordered seperately).

Best Price Guarantee
Add to Job List

Dimplex Edel Hot Water Cylinder Unvented Heat Pump 200L EDL200UK [EDL200UK-630]

Dimplex EDL200UK Edel 200 litre hot water heating cylinder, highly efficient as this electric boiler uses an air source heat pump to heat water at little cost by extracting heat from external air that is supplied through insulated ductwork (ordered seperately).

  • Uses 5 times less electricicty when comared with standard electric water heaters
  • Patented high performance heat exchanger
  • Compact at just 630mm diameter
  • Silent opertation. Anti-viration pads coupled with a sound proof hood
  • Helps to comply with Part L building regulations on specified electric heating
  • 5 Year Guarantee

The Dimplex Edel hot water cylinder helps to reduces the Delling emissions in relation to the Governements SAP (Standard Assesment Procedure), this is used for the purpose of complying with building regulations. The Dwelling CO2 Emmission Rate is equal to the annual CO2 emissions per unit floor area for water heating, space heating, lighting and ventilation, less the emissions from energy saving technology such as the Dimplex Edel, expressed in kg/m2/year.

The Edel Air Source Heat pump water heaters are made from high quality immersion heating elements for fast reheat times. Coupled with 50mm of low GEP insulation foam together with 100% recyclable stainless steel components and a strong outer shell manufactured from completey recylced materials.

Dedigned to deliver heated domestic and sanitary hot water as part of a pressurised water heating system to comply with section G3 of the Building Regulations.

Key Features:

Made in Britain

- Air heat pump hot water cylinder
- 200 litre capacity
- Achievable hot water temperature 60°C
- Power Input - 2200 Watt (700W heat pump + 1500W immersion)
- Max output from heat pump at 45°C 1650 Watt
- Air flow 250 to 400m3/h
- Sound pressure level at 2M 33dB(A)
- Refrigerant R290/ 0.14kg
- Standing heat loss 1.61kWh/24h
- Air ducting method separate inlet and outlet to exterior
- Heating time 6h21
- Coefficient of performance 3.21
- Dimensions: 630mm diameter, 1426mm height
- Weight 80kg
- Air duct diameter 160mm
- Maximum ducting length 20m (intake and outlet)
- Water connections Inch M 3/4"
- Condensate tube 18/23mm
- Electrical supply 230V~ 50Hz 1P&N
- IP rating: IPX1
- Requires MCB type C 16 Amp
- Material: Stainless steel
- Insulation: 45mm PU foam with PVC outer
- Maximum operating pressure 6 bar
- Maximum condensate production 0.3 L/h
- Approvals: Water regulations G3 KIWA approval to EN12897 pending
- T&P valve Factory fitted to comply with Building Regulation G3
- Accessories: Inlet group, tundish, expansion vessel

 

Please see attached installation and user instructions for additional guidance.

 

 

Click Here Dimplex Edel Water Heater Range                                                                  Have You Got Any Other Questions?question

Back to top

Dimplex Edel Hot Water Cylinder Unvented Heat Pump 200L EDL200UK [EDL200UK-630]

No specification details available.

Back to top

Also recommended...