The Dimplex 3kW convector heater provides quick and efficient heating for any room where additional heat is required. A turbo fan setting provides rapid heat distribution when required.

Ideal for heating larger rooms, this powerful 3kW convector heater benefits from a highly accurate electronic thermostat and 7 day timer which can provide up to 4 programmed heating schedules per day. A large rotary dial makes it easy to turn the heater on/off and choose between high and low heat outputs.

Adaptive start technology ensures that the heater reaches the target temperature at the set time. For example, if the heater was set to 21° at 6am, the heater will begin to warm up before 6am in order to ensure it has reached 21° by 6am. Heaters without adaptive start set to the same parameters will only begin to heat up at 6am.

ML3TSFTie7 can be wall mounted or floor standing, whilst a lightweight frame and integrated carry handles make it easy to move from room to room if required. The modern, sleek design is replicated on all sides of the heater meaning it can be placed anywhere in a room and still look stylish.

The ML3TSFTie7 benefits from very quiet operation and a number of safety features including overheat protection, LOT20 compliance and a tilt switch which will automatically turn the heater off if it is knocked over.

Dimplex ML3TSFTie7 is a direct replacement for DXC30FTIE7 which has now been discontinued.

Features of the Dimplex ML3TSFTie7 3kW Convector Heater Include:

• 3kW Convector Heater
• Turbo Fan Boost Setting for Rapid Heat Distribution
• Ideal for Larger Rooms
• Quiet Operation
• 7 Day Timer with Capability for 4 Heating Schedules Per Day
• Highly Accurate Electronic Thermostat Which Can Be Digitally Locked
• Rotary Dial for Power Output Selection
• Adaptive Start Technology Achieves Set Temperature at Programmed Time
• Frost Protection
• Lightweight
• Integrated Carry Handles
• Wall Mounted or Floor Standing (brackets included)
• 360° Modern Design
• Tilt Switch Turns Off Heater Automatically if Knocked Over
• Overheat Protection
• Lot20 Compliant
• BEAB Approved
• Installation: 13 Amp Plug
• Controls Located on Side of Heater
• Heat Output Selection: Off/2kW/3kW
• Location of Heat Output: Grille at Top of Heater
• Construction: Steel Casing, Plastic Trims
• Cable Exit Point: Underside
• Cable Length: 1.5m
• Voltage: 230-240V
• Height: 443mm (inc. feet)
• Width: 705mm
• Depth: 233mm (inc.feet)
• Weight: 4.5kg
• Finish: White & Light Grey
• Warranty: 3 Years (with registration)