Envirovent EVF-H Wall Mounted Ventilation Unit with Heater

Product Code EVF-H

reviews

Available for Delivery only, change to Fast Delivery Service

£1,308.33

exc VAT

£1,570.00 : inc VAT

£1,570.00

inc VAT

£1,308.33 : exc VAT

  • BULK SAVINGS!
  • QTY Unit Price
  • 1-2 £1,308.33 £1,570.00
  • 3+ £1,301.42 £1,561.70

Qty:

EnviroVent EVF-H Wall Mounted Positive Input Ventilation Unit With Heater — Whole House Condensation Control For Flats & Apartments

The EnviroVent EVF-H wall mounted unit is a whole house positive input ventilation (PIV) system with integral comfort heater, designed specifically for flats and apartments that don’t have a loft space. Mounted on an external wall, it gently introduces a continuous supply of filtered, tempered air to the central hallway, diluting and displacing moisture-laden, stale air to tackle condensation, mould and poor indoor air quality throughout the dwelling.

Powered by an ultra low watt brushless DC motor and forward-curved centrifugal fan, the unit delivers trickle and boost airflow settings from around 9 up to 23 litres per second with specific fan power from 0.29 to 0.39W/l/s and outlet sound levels as low as <15dB(A) at trickle (measured at 3m). The compact wall case (approx. 505mm high x 380mm wide x 185mm deep) is ideal where space is tight and loft access isn’t available.

Whole House PIV For Homes Without A Loft

The EVF H is designed as a central PIV unit for flats and apartments: fresh air is drawn in through the external wall, filtered, then supplied into the dwelling where it gently pushes out moist, stale air via natural leakage paths and existing extract points. This “displacement ventilation” approach helps stop streaming windows, reduces or eliminates black mould, removes musty smells and improves overall air quality for residents.

Because the air supply is almost imperceptible, occupants benefit from continuous background ventilation without noticeable draughts, supporting compliance with UK Building Regulations ventilation standards when correctly specified and installed.

Integral Intelligent Comfort Heater

An integral “intelligent low temperature” comfort heater tempers the incoming air during cold weather, helping maintain supply air temperatures around 10°C. A sensor monitors the incoming air and pulses the tubular heater element to hold the pre-set minimum, with two independent safety cut-outs that shut down the heater if the fan fails. A local enable / disable switch lets you turn the heater off for minimum running cost outside the heating season.

Ultra Low Watt DC Motor & Quiet Operation

The EVF-H uses an ultra low watt brushless DC motor with sealed-for-life ball bearings, designed for continuous operation at a pre-set background rate to minimise energy use and maintenance. Performance data shows:

Trickle setting ~9–10l/s at around 3.4–3.6W with SFP ~0.37–0.39W/l/s and outlet sound levels <15dB(A) at 3m

Boost setting ~20–23l/s at approximately 6.1–7.4W with SFP ~0.30–0.32W/l/s and outlet sound level around 20.3dB(A) at 3m

This combination of low power and very low noise makes the unit suitable for occupied residential spaces where fan noise needs to be unobtrusive.

Long Life Filter, Hours Run Meter & 5 Year Warranty

The wall unit is fitted with an integral air quality / insect filter designed for long life; EnviroVent advise cleaning or replacing the filter after roughly 24–36 months depending on conditions. Servicing is simply a case of exchanging consumable items, which can then be recycled by the manufacturer to reduce waste.

An integral hours-run meter is fitted as standard, giving landlords and maintenance teams an easy way to verify operation and schedule filter changes as part of planned maintenance. The unit carries a 5-year warranty and is BBA approved.

Installer Friendly & Regulation Ready

Designed to mount on an external wall with a 100mm duct and louvre grille, the EVF H is straightforward to install in retrofit or new build apartments. The system is 230V AC supplied and conforms to UK Building Regulations and relevant EMC and Low Voltage Directive requirements, with CE marking.

Typical applications include social housing and private rented flats with persistent condensation, mould and high humidity, as well as privately owned apartments where occupants want better air quality and more even heat distribution without major building works.

Key Features Of The EnviroVent EVF-H Wall Mounted PIV Unit With Heater:

  • Whole House Positive Input Ventilation System Designed Specifically For Flats And Apartments Without A Loft Space
  • Wall Mounted Unit Draws Fresh Air From Outside Filters It And Gently Supplies It Into The Dwelling To Displace Moisture Laden Stale Air
  • Helps Eradicate Surface Condensation Black Mould Streaming Windows And Musty Odours While Improving Overall Indoor Air Quality
  • Powered By An Ultra Low Watt Brushless DC Motor With Sealed For Life Ball Bearings For Continuous Low Energy Operation
  • Integral Intelligent Comfort Heater Tempers Incoming Air And Maintains Supply Air Temperature Around 10 Degrees Celsius In Cold Weather
  • Two Independent Safety Cut Outs Shut Down The Heater In The Event Of Fan Failure With Separate Heater Enable Disable Switch
  • Forward Curved Centrifugal Fan Delivers Trickle Medium Large And Boost Settings From Approximately 9 To 23 Litres Per Second
  • Specific Fan Power Typically Between 0 Point 29 And 0 Point 39 Watts Per Litre Per Second Depending On Setting For Low Running Costs
  • Very Quiet Operation With Outlet Sound Levels Less Than 15 dB A At Trickle And Around 20 dB A At Boost Measured At 3 Metres
  • Integral Hours Run Meter As Standard For Easy Monitoring Of Operating Time And Maintenance Scheduling
  • Long Life Integral Air Quality And Insect Filter With Recommended Clean Or Replace Interval Of Around 24 To 36 Months
  • Supplied With Louvre External Grille And 100 Millimetre Spigot For Connection To Standard Circular Ducting
  • Compact Wall Case Approximately 505 Millimetres High By 380 Millimetres Wide By 185 Millimetres Deep For Flats And Small Plant Areas
  • 230 Volt AC Supply With Ultra Low Watt Power Usage Typically Between 3 Point 4 And 7 Point 4 Watts Depending On Airflow Setting
  • Conforms To Uk Building Regulations Ventilation Requirements And Relevant EMC And Low Voltage Directives And Is CE Marked
  • BBA Approved Condensation Control Solution With 5 Year Warranty

View All PIV units

Model Number: EVF-H
Brand: EnviroVent
Product Range: Wall Mounted Positive Input Ventilation Unit
Product Type: Whole House PIV Unit With Integral Comfort Heater
Mounting Location: Internal Wall On External Facade Supplying Air To Central Hallway
Typical Application: Condensation And Mould Control In Flats And Apartments Without Loft Space
Airflow Settings (Approximate): Trickle 9–10L Per S Medium 11–14L Per S Large 17–19L Per S Boost 20–23L Per S
Specific Fan Power (SFP): Approximately 0 Point 29–0 Point 39W Per L Per S Depending On Setting
Fan Power Consumption: Approximately 3 Point 4W At Trickle Up To Around 7 Point 4W At Boost
Sound Pressure Level: Less Than 15 dB A At Trickle Around 17 dB A At 17L Per S And Approximately 20 Point 3 dB A At 20L Per S Measured At 3m
Motor Type: Ultra Low Watt Brushless DC Motor With Sealed For Life Ball Bearings
Fan Type: 140 By 220mm Forward Curved Centrifugal Fan
Heater Type: Integral Intelligent Low Temperature Comfort Heater With Solid Tubular Sheath Element
Heater Control: Automatic Temperature Control With Incoming Air Sensor Plus Local Enable Disable Switch
Electrical Supply: 230V AC 50Hz
Filter: Integral Long Life Air Quality And Insect Filter Recommended Clean Or Replace After 24–36 Months
Spigot Diameter: 99mm Nominal For 100mm Circular Duct
Dimensions (H X W X D): Approx. 505mm X 380mm X 185mm
Case Material / Colour: Plastic Housing White Finish
Ingress Protection: As Per Manufacturer Specification For Internal Wall Mounting
Controls And Indicators: Factory Preset Speed Settings Integral Hours Run Meter Local Heater Enable Disable Switch
Warranty: 5 Year On Going Warranty Subject To Specified Maintenance
Approvals And Certification: BBA Certificate 03 4043 CE Marked Conforms To UK Building Regulations And Relevant LDV And EMC Directives

Recommended Products

£15.18 £18.21

£18.21: inc VAT £15.18: exc VAT

Qty:

£22.66 £27.19

£27.19: inc VAT £22.66: exc VAT

Qty:

£6.83 £8.19

£8.19: inc VAT £6.83: exc VAT

Qty:

£6.83 £8.19

£8.19: inc VAT £6.83: exc VAT

Qty:

£8.29 £9.95

£9.95: inc VAT £8.29: exc VAT

Qty:

£5.46 £6.55

£6.55: inc VAT £5.46: exc VAT

Qty:

£2.49 £2.99

£2.99: inc VAT £2.49: exc VAT

Qty:

We found other products you might like!

Image of Manrose Inline Extractor Fan with Timer Mixed Flow MF100T

MF100T

397 reviews
£40.99 £49.19: inc VAT £49.19 £40.99: exc VAT

Qty:

Image of Vent Axia 498095 Lo-Carbon NBR dMEVc Extractor Fan 100mm

498095

2 reviews
£44.92 £53.90: inc VAT £53.90 £44.92: exc VAT

Qty:

Image for Vent Axia Revive 7 Lo-Carbon Ventilation Fan HTP 473848

473848

3 reviews
£115.83 £139.00: inc VAT £139.00 £115.83: exc VAT

Qty:

Image for Vent-Axia Silent Fan VASF100T Bathroom Extractor Fan Timer 446659

446659

44 reviews
£45.33 £54.39: inc VAT £54.39 £45.33: exc VAT

Qty:

Image of Vent Axia PIV with Heater PureAir Home Positive Input Ventilation

479091

22 reviews
£269.17 £323.00: inc VAT £323.00 £269.17: exc VAT

Qty:

Manrose 1021 PVC Flexible Ducting 100mm 3M Length

1021

24 reviews
£9.34 £11.21: inc VAT £11.21 £9.34: exc VAT

Qty: