EV Ultra 10mm 5 Core Cat5 SWA Cable 1M

Price shown is per meter

The EV-ULTRA5C10.0CAT5SWA is BASEC approved and has been typically designed for use in the installation of 22kW three phase electric vehicle charge points.

The cable combines power conductors and an enhanced Cat 5 screened data cable encapsulated in a double sheathed design for extra protection. A Galvanised Steel Wire Armour provides further protection for the cables.

Although primarily designed for use in electric vehicle charge point installations, the cable is also suitable for other applications where power and data is required. The cable can be installed in air, clipped to surface, on cable tray/ladder work and embedded in concrete. The cables can be laid direct in the ground providing that suitable mechanical protection is in place

The EV-Ultra cable consists of power conductors and data cables that are rated to the same nominal voltage – therefore segregation of power and data is not required.

EV-Ultra incorporates screened, twisted pair data cables and is also constructed with a lay length that reduces interference. Laboratory and on-site installation tests have also been conducted and no interference or degredation of signal was recorded.

Key Features of EV-Ultra 10mm 5 Core Tuff Cat5e SWA Cable Include:

• Power and Data Combined in One Cable
• Designed for Three Phase EV Charger Installations and Other Applications Where Both Power and Data Are Required
• Easier to Route Through Walls and Buildings
• Saves on Installation Time
• Provides a Neater Installation
• CarbonTEK® SWA
• Tuff Heat Resistant Sheathing
• 1.25mm SWA Protection
• Can be Installed in Air, on Ladders Work and Cable Trays, Surface Clipped and Embedded in Concrete
• Can be Laid Directly in the Ground if Suitable Mechanical Protection is Provided
• Power Conductors and Data Cables are Rated to Same Nominal Voltage
• Screened, Twisted Pair Data Cables and Lay Length to Reduce Interference
• Insulation: Thermosetting XLPE Type GP8 to BS 7655-1.3
• Conductor: Plain Annealed Copper Class 2 Stranded to BS EN 60228
• 5 Core: Yellow/Green, Blue, Brown, Grey. Black
• Max. Current: 71A
• Voltage Drop 9mV/A/m): 4
• Min/Max Operating Temperature:  -15°C/90°C
• Minimum Bending Radius: 8xØ
• Nominal Stranding of Conductor: 7/1.35mm
• Nominal Radial Thickness of Insulation: 0.7mm
• Nominal Overall Diameter of Bedding: 18.4mm
• Nominal Radial Thickness of Sheath: 1mm
• Approx. Overall Diameter: 23.4mm
• Approx. Weight: 1083kg/km

View All EV Ultra Cables

View All EV Chargers

If you need some help, would like to take advantage of our Price Promise or perhaps have a large order to place, please give our team of professionals a call on 0203 994 5470, drop us an email at sales@electricpoint.com or use our Contact Form.