Fusebox F3004RA 4 Way 63A RCD Consumer Unit

FuseBox F3004RA is a 4 usable way metal consumer unit with a 63A 30mA Type A RCD incomer and a built-in Type 2 surge protection device (SPD). It's a compact, fully protected board for garages, outbuildings, workshops, extensions and small sub-mains supplies.

RCD Protection and Surge Protection Built In

The 63A 30mA Type A RCD incomer gives every circuit on the board earth leakage protection as standard, guarding against electric shock from the moment the board goes in. The factory-fitted Type 2 SPD protects connected equipment from damaging transient overvoltages caused by lightning or switching on the network. That saves you fitting a separate SPD and keeps the installation compliant with current wiring regulations. With 4 usable ways, there's room for lighting, sockets and a dedicated appliance circuit in a small space.

Robust 1mm Steel Enclosure

The enclosure is made from 1mm steel with a smooth RAL 9001 powder-coated finish, built to BS EN / IEC 61439-3 for a durable, non-combustible installation. At just 259mm x 162mm x 113mm, it fits neatly in garages, sheds, cupboards and plant rooms where space is tight. The board is rated IP2XC and suitable for 230V, 50/60Hz supplies.

Installer-Friendly Design

A choice of 20mm and 32mm knockouts on the top, bottom and sides, plus a 90mm x 50mm rear cable entry, gives you flexible cable routing for surface or rear-fed installations. Terminal bars accept cables up to 16mm² with a 2.0Nm torque setting. The board is compatible with the FuseBox ACCF tail clamp. An accessory pack with circuit identification labels and grommet strip is included, so the board can be finished and labelled straight away.

Key Features of the FuseBox F3 Series 4 Way Type A RCD Consumer Unit with SPD F3004RA Include:

• 63A 30mA Type A RCD Incomer Protects Every Circuit Against Earth Leakage
• Built-In Type 2 SPD Protects Equipment From Transient Overvoltages
• 4 Usable Ways For Compact Installations
• Ideal For Garages, Outbuildings, Workshops & Extensions
• Robust 1mm Steel Enclosure
• Smooth RAL 9001 Powder-Coated Finish
• 20mm & 32mm Knockouts On The Top, Bottom & Sides
• 90mm x 50mm Rear Cable Entry
• Compatible With The FuseBox ACCF Tail Clamp
• Accessory Pack Includes Circuit Identification Labels & Grommet Strip
• Rated Voltage: 230V AC
• Frequency: 50/60Hz
• Maximum Terminal Bar Capacity: 16mm²
• Terminal Bar Torque: 2.0Nm
• Protection Degree: IP2XC
• 35mm DIN Rail Mounting
• Height: 259mm
• Width: 162mm
• Depth: 113mm
• Weight: 2.3kg
• Built To BS EN / IEC 61439-3
• UKCA & CE Marked, RoHS Compliant

If you just need some help, would like to take advantage of our Price Promise or perhaps have a large order to place give our team of professionals a call on 0203 994 5470, drop us an email at sales@electricpoint.com or use our Contact Form.

Browse All Our Wylex Consumer Units

Browse All Our Consumer Units