JCC Line of Light LED Linear 4ft Mid/End Dir/Indir 40W CCT DALI Silver

The JCC Line of Light LED Linear 4ft Mid/End Direct/Indir 40W CCT DALI Silver is a 1205mm “extend” module designed to sit in the middle or at the end of longer Line of Light runs. Supplied without end caps or flex, it’s ideal for building seamless continuous rows, frames and rectangular layouts in offices, corridors and other commercial interiors where a clean, unbroken line of light is required. The direct/indirect body throws light both down to the working plane and up towards the ceiling, helping to soften contrast and brighten the whole space.

Consistent 40W output with selectable CCT

Running at a fixed 40W, this section delivers an output of 4650 lumens at 116 lumens per circuit watt, providing bright, efficient illumination for general and task lighting. A built-in 3CCT selector (3000K, 4000K and 5700K) lets you tune the colour temperature at commissioning to suit receptions, open-plan offices or circulation areas. A 75° beam angle and CRI 80–89 ensure wide, comfortable coverage and dependable colour rendering over desks, walkways and display zones.

DALI / switch-dim control and installer-friendly design

The JCC Line of Light LED Linear 4ft Mid/End Direct/Indir 40W CCT DALI Silver uses a two-part construction for easy access to terminations and internal components. Sections and corners connect via a simple plug-and-play linking system using the JC077156 linking kit and matching corner and suspension accessories, keeping installation fast and tidy. A constant-current BOKE driver with DALI-2 and switch-dim compatibility, power factor 0.95 and low harmonic distortion supports efficient, stable operation on 220–240V mains. With aluminium construction, a polycarbonate diffuser, 50,000-hour LED life and a 5-year warranty (terms apply), it’s a robust, low-maintenance choice for modern commercial linear schemes.

Features of the JCC Line of Light LED Linear 4ft Mid/End Dir/Indir 40W CCT DALI Silver:

• 1205mm mid/end “EXT” module in silver for continuous Line of Light runs
• Direct/indirect distribution for both downward task lighting and upward ceiling wash
• Designed for surface or suspended mounting in commercial interiors outside bathroom zone 2
• Supplied without end caps or flex for use as a middle/end section in longer runs
• Two-part construction for easy access to wiring and internal components
• 40W circuit power with actual lumen output of 4650lm
• High efficacy of 116 lumens per circuit watt
• 3CCT selectable: 3000K, 4000K and 5700K
• 75° beam angle for wide, even illumination
• Colour rendering index CRI 80–89 (Ra 80)
• Constant-current BOKE driver, DALI-2 (DT-6) and switch-dim compatible
• Driver output: 6–42V DC, secondary running current 550–1300mA
• Mains input 220–240V AC, 50/60Hz; primary running current 0.3A
• Inrush current 4.75A peak, 162µs duration (50% Ipeak)
• Power factor 0.95 with total harmonic distortion around 10%
• Aluminium body with polycarbonate diffuser and driver housing
• Compatible accessories: JC077156 linking kit, JC077150 corner (BLK/SIL/WH), JC077153 2m and JC077154 5m suspension kits
• Length: 1205mm
• Width: 60mm
• Height: 78mm
• LED lifetime: 50,000 hours (L70 under optimum conditions)

View all Linear Lights 

View All JCC Lights

If you need some help, would like to take advantage of our Price Promise or perhaps have a large order to place, give our team of professionals a call on 0203 994 5470, drop us an email at sales@electricpoint.com or use our Contact Form.