JCC Line of Light LED Linear 4' Mid/End Dir/Indir EM 40W 1-10V CCT UGR

The JCC Line of Light LED Linear 4' Mid/End Dir/Indir EM 40W 1-10V CCT UGR is a 1205mm “EXT” module designed to bring maintained emergency lighting and low-glare performance to longer Line of Light runs. Supplied without end caps or flex, it’s intended specifically as a middle or end section, so you can build seamless rows, squares and rectangular layouts where the light, not the hardware, is the focus.

High-output performance with selectable colour temperature

Driven at a fixed 40W, this mid/end module delivers around 4200 lumens at 105 lm/W, providing bright, even illumination suitable for general and task lighting. A 3CCT selector allows you to choose between 3000K, 4000K and 5700K at commissioning, so the same fitting can be tuned from warm-front-of-house areas to neutral offices and cooler task-focused spaces. A 70° beam angle, CRI 80–89 and UGR-optimised optics help minimise glare while maintaining good colour rendering across desks and circulation routes.

Installer-friendly 1–10V dimming with 3-hour emergency backup

The JCC Line of Light LED Linear 4' Mid/End Dir/Indir EM 40W 1-10V CCT UGR uses a two-part housing, giving easy access to terminations and internal components. Sections and corners connect via a simple plug-and-play linking system using the JC077156 linking kit and matching corner and suspension kits, helping to reduce time on site. A constant-current BOKE driver with 1–10V dimming, power factor 0.98 and low harmonic distortion provides efficient, stable operation on 220–240V mains. For emergency operation, an integral LiFePO₄ 3.2V 3300mAh battery delivers a minimum three-hour duration with 24-hour recharge and deep-discharge protection, giving an emergency light output ratio of 5% LOR. With a 50,000-hour LED lifetime and 5-year warranty including batteries (terms apply), it’s a robust, low-maintenance solution for commercial linear emergency schemes.

Features of the JCC Line of Light LED Linear 4' Mid/End Dir/Indir EM 40W 1-10V CCT UGR:

• 1205mm middle/end “EXT” module in black for continuous Line of Light runs
• Direct/indirect distribution for both downward task lighting and upward ceiling wash
• UGR-optimised optics for low-glare office and commercial lighting
• Designed for surface or suspended mounting in commercial interiors outside bathroom zone 2
• Two-part construction for easy access to terminations and internal components
• Fixed 40W circuit power for consistent high-output performance
• Approximate lumen output: 4200lm
• High efficacy of 105 lumens per circuit watt
• 3CCT selectable colour temperatures: 3000K, 4000K and 5700K
• 70° beam angle for smooth, uniform light distribution
• Colour rendering index CRI 80–89 (Ra 80)
• Constant-current BOKE driver with 1–10V dimming
• Driver output voltage 24–42V DC; secondary running current 350–800mA
• Mains input 220–240V AC, 50/60Hz; primary running current 0.21A
• Inrush current 13.25A peak, 266µs duration (50% Ipeak); THD around 8%; power factor 0.98
• Integral LiFePO₄ 3.2V 3300mAh emergency battery with deep-discharge protection
• Minimum 3-hour emergency run time with 24-hour recharge
• Emergency light output ratio: 5% LOR in emergency mode
• Aluminium body with polycarbonate diffuser and driver housing for a robust, lightweight build
• Compatible accessories: JC077156 linking kit, JC077150 corner (BLK/SIL/WH), JC077153 2m and JC077154 5m suspension kits
• Manufactured in accordance with BS EN 60598-2-1 and BS EN 60598-2-22, CE and UKCA marked
• Length: 1205mm
• Width: 60mm
• Height: 78mm
• 5-year warranty (terms and conditions apply) for added peace of mind

View all Linear Lights 

View All JCC Lights

If you need some help, would like to take advantage of our Price Promise or perhaps have a large order to place, give our team of professionals a call on 0203 994 5470, drop us an email at sales@electricpoint.com or use our Contact Form.