JCC Line of Light LED Linear 4' Mid/End Dir/Indir EM 40W CCT DALI UGR

The JCC Line of Light LED Linear 4' Mid/End Dir/Indir Emergency 40W CCT DALI UGR is a 1205mm “EXT” module designed to provide maintained emergency lighting and low-glare illumination within longer Line of Light installations. Supplied without end caps or flex, it’s intended as a middle or end section in continuous rows, squares or rectangles, giving a clean, uninterrupted ribbon of light in offices, education and commercial spaces.

High-output, selectable white light

Driven at a nominal 40W, this module delivers around 4200 lumens at 105 lm/W, making it suitable for both general and task lighting. A 3CCT selector lets you choose between 3000K, 4000K and 5700K at commissioning, so you can tune each run from warm front-of-house areas to neutral workspaces or cooler task-focused zones. A 70° beam angle, CRI 80 and UGR-optimised optic help to provide smooth, visually comfortable light across desks and circulation routes.

DALI dimming, 3-hour emergency backup and easy installation

The JCC Line of Light LED Linear 4' Mid/End Dir/Indir Emergency 40W CCT DALI UGR uses a two-part housing so terminations and internal components are easy to access, while sections and corners connect via a simple plug-and-play linking system using the JC077156 linking kit and compatible corners and suspension kits. A constant-current BOKE driver with DALI-2 (DT-6) and switch-dim compatibility, power factor 0.95 and low harmonic distortion ensures efficient, stable operation on 220–240V mains. For emergency operation, an integral LiFePO₄ 3.2V 3300mAh battery provides a minimum three-hour run time with 24-hour recharge and deep-discharge protection, delivering an emergency light output ratio of 5% LOR. With a rated 50,000-hour LED lifetime and a 5-year warranty including batteries (terms apply), it’s a robust, low-maintenance choice for modern commercial schemes.

Features of the JCC Line of Light LED Linear 4' Mid/End Dir/Indir Emergency 40W CCT DALI UGR:

• 1205mm middle/end “EXT” module in black for continuous Line of Light runs
• Direct/indirect distribution for both downward task lighting and upward ceiling wash
• UGR-optimised optics to support low-glare office and commercial lighting designs
• Designed for surface or suspended mounting in commercial interiors outside bathroom zone 2
• Two-part construction allowing easy access to terminations and internal components
• Nominal 40W circuit power with high-output performance
• Actual lumen output: 4200lm
• Efficacy: 105 lumens per circuit watt
• 3CCT selectable colour temperatures: 3000K, 4000K and 5700K
• 70° beam angle for smooth, uniform light distribution
• Colour rendering index CRI 80–89 (Ra 80)
• Constant-current BOKE driver with DALI-2 (DT-6) and switch-dim control
• Driver output voltage 6–42V DC with secondary running current 550–1300mA
• Mains input 220–240V AC, 50/60Hz; primary running current 0.3A
• Inrush current 4.75A peak, 162µs duration (50% Ipeak); total harmonic distortion around 10%; power factor 0.95
• Integral LiFePO₄ 3.2V 3300mAh emergency battery with deep-discharge protection
• Minimum 3-hour emergency duration with 24-hour recharge time
• Emergency light output ratio: 5% LOR in emergency mode
• Aluminium body with polycarbonate diffuser and driver housing for a robust, lightweight build
• Compatible accessories: JC077156 linking kit, JC077150 corner (BLK/SIL/WH), JC077153 2m and JC077154 5m suspension kits
• Manufactured in accordance with BS EN 60598-2-1 and BS EN 60598-2-22, CE and UKCA marked
• Length: 1205mm
• Width: 60mm
• Height: 78mm
• 5-year warranty (terms and conditions apply) for added peace of mind

View all Linear Lights 

View All JCC Lights

If you need some help, would like to take advantage of our Price Promise or perhaps have a large order to place, give our team of professionals a call on 0203 994 5470, drop us an email at sales@electricpoint.com or use our Contact Form.