Hager 11 Way Consumer Unit High Integrity 100A Type 2 SPD RCCB VME911CUSPD

Hager VME911CUSPD — 11 Way High Integrity Consumer Unit, 100A Main Switch with 2x 100A 30mA Dual RCCB & Single Module Type II SPD - replaces the now discontinued Hager VML910CUSPD, VML910CUSPDRK and VML966RK

Hager VME911CUSPD is an 11 way high integrity consumer unit from the Design Evo range, built around a 100A main switch feeding two 100A 30mA RCCBs, with single module space for a Type II surge protection device and overvoltage protection built in. Splitting circuits across two independently-switched RCCBs, it's designed for installations where losing one RCD shouldn't take out the whole property — ideal for properties with critical circuits like alarms, freezers, or medical equipment.

Fast Installation

As a dual RCD consumer unit, the VME911CUSPD comes pre-configured with two 100A 30mA RCCBs as standard, so contractors don't need to source and wire in separate incomers to achieve high integrity split load protection. The 100A main switch is fitted as standard, keeping the board ready to wire straight out of the box.

The single module SPD provision means Type II surge protection can be added directly into the board's busbar system without needing a separate enclosure, and built-in overvoltage protection adds a further layer of defence for sensitive electronics on the circuit.

Safe & Reliable High Integrity Consumer Unit

This high integrity consumer unit carries IP3X ingress protection and IK05 impact resistance, so it holds up against knocks and keeps live parts enclosed. With two independent 30mA RCCBs, a fault on one RCD group won't cut power to circuits protected by the other, reducing nuisance outages on critical loads.

The steel enclosure isn't interlockable and the door isn't transparent, keeping the design straightforward for standard domestic and light commercial installs. The non-combustible steel construction meets the regulatory requirements for consumer units in domestic premises.

Installation & Compliance

Rated at 100A, the VME911CUSPD suits properties needing dual RCD protection without the complexity of a fully populated board. Suitable for indoor use only, it's designed to take Hager's Design Evo device and busbar system, keeping the whole board within one compliant range. British-made by Hager, backed by Hager's UK-based technical support team, and supports full compliance with BS 7671:2018+A4:2026.

Key Features of the Hager VME911CUSPD 11 Way High Integrity Consumer Unit Include:

• High Integrity Dual RCD Consumer Unit For Critical Circuit Protection
• 100A Main Switch Fitted As Standard
• 2x 100A 30mA RCCBs Pre-Fitted For Split Load Protection
• Single Module Type II SPD Provision For Compact Surge Protection
• Built-In Overvoltage Protection
• Compatible With Hager Design Evo Devices & Busbar System
• Non-Combustible Steel Construction
• IP3X Ingress Protection
• IK05 Impact Resistance For Site Durability
• Rated Current 100A
• 11 Way, Single Row, 1 DIN Rail Capacity
• Dimensions & Weight:
• Height: 240mm
• Width: 400mm
• Depth: 102.5mm
• Weight: 5.3kg

View All Hager Consumer Units

View All Hager Circuit Protection

View All Hager Electrical

If you just need some help, would like to take advantage of our Price Promise or perhaps have a large order to place give our team of professionals a call on 0203 994 5470, drop us an email at sales@electricpoint.com or use our Contact Form.