Hager 14 Way Consumer Unit 100A Switch Disconnector Incomer VME114

Hager VME114 — 14 Way Hager Consumer Unit, 100A Switch Disconnector Incomer, Surface-Mounted - replaces the now discontinued Hager VML114 and VML114RK

Hager VME114 is a 14 way consumer unit from the Design Evo range, fitted with a 100A double-pole switch disconnector as the incomer. As a fuller Hager 14 way consumer unit built for surface mounting, it gives contractors room for larger domestic circuit schedules in a straightforward, standards-compliant single-row board.

One-Handed Fitting & Fast First Fix

Design Evo's fitting features come as standard on every board, including the VME114. Smart lid locators hold the front cover in place automatically during final fix for true one-handed fitting, while retained, captive screws stay in the cover so nothing gets dropped or lost on site. Lid prop holes let you hold the lid open with a tool to label circuits hands-free, and an integrated spirit level built into the neutral bar gives a fast, tool-free check on horizontal alignment.

Round knockouts on the top, bottom and sides replace the old square cut-outs, so standard grommets, glands and entry plates fit straight away in a range of sizes. A rear cable protector plate guards cables from abrasion at the rear entry points, and a secure cable clamp firmly holds meter tails, reducing strain on terminals and freeing up hands during connection.

A Fuller 14 Way Circuit Schedule Without Going Dual Row

The VME114's 14 way, single-row, single-rail layout gives contractors headroom for a larger domestic property's circuit count without needing to step up to a dual row board. The 100A switch disconnector incomer is fitted as standard, so there's no separate main switch to source or wire in — just add devices and go.

Quick-release DIN clips mean a single device can be swapped without dismantling the whole busbar, so future call-backs and circuit changes on this board stay quick, even with more circuits to manage.

Safety & Compliance

The VME114 carries IP4X ingress protection and IK05 impact resistance, so it holds up against knocks and keeps live parts enclosed. It's built to Isolation Class I in a non-combustible steel enclosure, meeting the regulatory requirements for consumer units in domestic premises. A lockable lid with pre-cut facility accepts an optional lock barrel or padlock in place of the supplied bung with no drilling required, supporting instant Lockout/Tagout (LOTO) compliance on site.

The 116A rated incomer gives strong headroom above the standard domestic 100A supply, even on this fuller 14 way board, and torque settings are printed directly on compatible devices to support secure, inspection-ready connections.

Installation

Suitable for indoor use only and designed for surface mounting, the VME114 is built to take Hager's Design Evo device and busbar system, keeping the whole board within one compliant range that supports full compliance with BS 7671:2018+A4:2026. British-made by Hager in Telford, Shropshire, and backed by Hager's UK-based technical support team.

Key Features of the Hager VME114 14 Way Consumer Unit Include:

• Hager 14 Way Consumer Unit For A Fuller Domestic Circuit Schedule
• 100A Double-Pole Switch Disconnector Incomer Fitted As Standard
• Smart Lid Locators For True One-Handed Fitting
• Retained, Captive Screws Can’t Be Dropped Or Lost On Site
• Integrated Spirit Level Built Into The Neutral Bar
• Round Knockouts Top, Bottom & Side For Flexible Cable Entry
• Rear Cable Protector Plate & Secure Cable Clamp For Tidy Terminations
• Quick-Release DIN Clips For Fast Device Swaps
• Lockable Lid With Pre-Cut Facility, Tool-Free LOTO Ready
• Non-Combustible Steel Construction To Isolation Class I
• IP4X Ingress Protection
• IK05 Impact Resistance For Site Durability
• Rated Current 116A
• Dimensions & Weight:
• Height: 240mm
• Width: 364mm
• Depth: 102.50mm
• Internal Depth: 80mm
• Weight: 3.3kg
• British-Made By Hager In Telford, Shropshire

Hager Consumer Units
Hager MCB's
Hager RCBO's
Hager AFDD's

If you just need some help, would like to take advantage of our Price Promise or perhaps have a large order to place give our team of professionals a call on 0203 994 5470, drop us an email at sales@electricpoint.com or use our Contact Form.