Hager 19 Way Consumer Unit 100A Switch Type 2 SPD VME10910SPD

Hager VME10910SPD — 9+10 Way Dual Row Consumer Unit, 100A Switch Disconnector Incomer with Single Module Type II SPD & Overvoltage Protection - replaces the now discontinued Hager VML106, VML106RK and VML406AH

Hager VME10910SPD is a 9+10 way (19 way total) dual row consumer unit from the Design Evo range, fitted with a 100A double-pole switch disconnector as the incomer, a single module space for a Type II surge protection device, and overvoltage protection built in. Built for surface mounting across two rows and two DIN rails, it packs a full 19 ways into a compact footprint — ideal where wall space is at a premium.

Fast, Tidy Installation

As a dual row consumer unit, the VME10910SPD splits its 19 ways across two rows and two rails, keeping the board narrower than a single-row equivalent while still giving contractors room for a full circuit schedule. The 100A switch disconnector incomer is fitted as standard, so there's no separate main switch to source or wire in.

The single module SPD provision means Type II surge protection can be added directly into the board's busbar system without needing a separate enclosure, and built-in overvoltage protection adds a further layer of defence for sensitive electronics on the circuit. The cooker group is suitable for use as a power current group, giving flexibility when planning circuit layout.

Safety & Reliability

This dual row consumer unit with SPD provision carries IP4X ingress protection and IK05 impact resistance, so it holds up against knocks and keeps live parts enclosed. The steel enclosure isn't interlockable and the door isn't transparent, keeping the design straightforward for standard domestic and light commercial installs.

The 110A rated incomer gives strong headroom for a domestic supply, and the non-combustible steel construction meets the regulatory requirements for consumer units in domestic premises.

Installation & Compliance

Suitable for indoor use only, the VME10910SPD is designed to take Hager's Design Evo device and busbar system, keeping the whole board within one compliant range. British-made by Hager, backed by Hager's UK-based technical support team, and supports full compliance with BS 7671:2018+A4:2026.

Key Features of the Hager VME10910SPD 9+10 Way Dual Row Consumer Unit Include:

• Dual Row, Dual Rail Consumer Unit For A Compact 19 Way Footprint
• 100A Double-Pole Switch Disconnector Incomer Fitted As Standard
• Single Module Type II SPD Provision For Compact Surge Protection
• Built-In Overvoltage Protection
• Cooker Group Suitable As Power Current Group
• Compatible With Hager Design Evo Devices & Busbar System
• Non-Combustible Steel Construction
• IP4X Ingress Protection
• IK05 Impact Resistance For Site Durability
• Rated Current 110A
• 9+10 Way (19 Way Total), 2 Rows, 2 DIN Rails
• Part of Hager's residential distribution range
• Height: 480mm
• Width: 293mm
• Depth: 102.5mm
• Weight: 6.1kg

View All Hager Consumer Units

View All Hager Circuit Protection

View All Hager Electrical

If you just need some help, would like to take advantage of our Price Promise or perhaps have a large order to place give our team of professionals a call on 0203 994 5470, drop us an email at sales@electricpoint.com or use our Contact Form.