Hager Contactor 25A 2NO 230V ESC225

Hager ESC225: 25A Contactor with 2 Normally Open (2NO) contacts for 230V~50Hz remote switching and control of power circuits.

Reliable Remote Switching & Control

Rated at 25A for AC1 loads, the Hager ESC225 handles the remote switching of power circuits in distribution boards, letting you control heating, lighting, or motor circuits from a separate control point. The 230V AC excitation voltage matches standard UK supply, so it drops straight into a Hager distribution board without additional interfacing.

Flexible Contact Configuration

Supplied with 2 Normally Open (2NO) contacts, this contactor suits circuits that need to close on command rather than break. Hager Ltd also offers Normally Closed (NC) variants across the range, so you can match contact type to the load and control logic of the installation. Every unit accepts the Hager ESC080 auxiliary contact, giving you an extra switching point for signalling or interlocking without swapping the base contactor.

Space-Saving Panel Installation

At just 1 modular spacing wide with a 60mm recess depth, the ESC225 fits tight distribution board enclosures without eating into valuable panel space. An IP2X degree of protection guards against accidental finger contact with live parts once installed, supporting safe panel access during routine maintenance.

Installation & Load Compliance

All contactor ratings apply to AC1 loads only; where the connected load differs from AC1 (e.g. fluorescent lighting or incandescent lamp banks), de-rate accordingly using the incandescent lamp load (1900W) and fluorescent load figures (950VA standard, 1990VA duo circuit, 810VA parallel compensated) as a reference. Hager Ltd requires LZ060 heat dissipation inserts between adjacent contactors, or between a contactor and neighbouring devices, to manage heat build-up and maintain rated performance in a densely populated Hager distribution board.

Key Features of the Hager ESC225 Contactor Include:

• Remote Switching & Control Of Power Circuits
• Accepts Hager ESC080 Auxiliary Contact For Added Signalling Or Interlocking
• Compact 1 Module Width Saves Distribution Board Space
• Rated Operating Voltage: 230V
• Rated Excitation Voltage: 230V AC
• Rated Operation Current: 25A
• Utility Category: AC1 (Category 7)
• Contact Configuration: 2 Normally Open (2NO), 0 Normally Closed
• Max Incandescent Lamp Load: 1900W
• Max Fluorescent Lamp Load: 950VA (Standard), 1990VA (Duo Circuit), 810VA (Parallel Compensated)
• Recess Depth: 60mm
• Degree Of Protection: IP2X
• Requires LZ060 Heat Dissipation Inserts Between Adjacent Contactors

If you need some help, would like to take advantage of our Price Promise or have a large order to place, give our team of professionals a call on 0203 994 5470, drop us an email at sales@electricpoint.com or use our Contact Form.