Hager Contactor 25A 3NO 230V ESC325

Hager ESC325: 25A 3NO Contactor rated at 230V~50Hz for remote switching and control of power circuits in distribution board installations.

Flexible Circuit Control

Three normally open contacts handle up to 25A AC1, giving you reliable remote switching for lighting, heating, and general power circuits. The 230V AC excitation coil means the contactor integrates easily into standard Hager distribution board control schemes without additional interface equipment.

Modular, Space-Saving Design

At just 2 modular spacings wide, the ESC325 fits neatly into a Hager distribution board enclosure alongside other DIN rail devices, so you don't lose valuable panel space on switching gear. An auxiliary contact block (Hager ESC080) can be added where extra signalling or interlocking is needed.

Safety & Reliability

Rated to IP2X for finger-safe protection against contact with live parts, the contactor is built for continuous use in AC1 duty. Where multiple contactors are installed side by side, or next to other heat-generating devices, Hager LZ060 heat dissipation inserts are required to maintain safe operating temperatures, so factor these into your panel layout at first fix.

Installation & Compliance

As a Hager Ltd product for professional distribution board installation, the ESC325 is intended for use by qualified electricians working on commercial and domestic panels. Ratings quoted are for AC1 loads only, so check load characteristics before specifying: motor, capacitive, or fluorescent lighting loads may require de-rating or an alternative contactor selection from the Hager AFDD and switching range.

Key Features of the Hager ESC325 Contactor Include:

• Remote Switching And Control Of Power Circuits Up To 25A AC1
• 3 Normally Open (NO) Contacts For Straightforward Circuit Switching
• Compatible With Hager ESC080 Auxiliary Contact Block For Added Signalling
• Compact 2-Module Width Saves Space In Hager Distribution Boards
• 230V AC Excitation Voltage For Standard Control Circuits
• Rated Operating Voltage: 400V
• Rated Operation Current: 25A
• Utility Category: AC7
• Ingress Protection: IP2X
• Max. Incandescent Lamp Load: 1900W
• Max. Fluorescent Lamp Load: 950VA (1990VA Duo Circuit, 810VA Parallel Compensated)
• Recess Depth: 60mm
• Requires Hager LZ060 Heat Dissipation Inserts When Installed Adjacent To Other Devices
• Supplied As: Single Contactor Unit

If you need some help, would like to take advantage of our Price Promise or have a large order to place, give our team of professionals a call on 0203 994 5470, drop us an email at sales@electricpoint.com or use our Contact Form.