Hager Design 16 Way 100A Split Load Consumer Unit VMLF916C

Hager VMLF916C: 100A 16 Way Design 10 Flush Mounted Split Load Consumer Unit with two 100A 30mA RCCBs for dual-circuit protection.

Safety & Reliability

This Hager distribution board splits the installation across two 100A 30mA RCCBs, so a fault on one group of circuits (for example a bathroom or outdoor supply) won't cut power to the rest of the property. The steel enclosure carries an IP2XC rating, giving finger-safe protection against contact with live parts once the board is installed.

Installation & Compliance

Designed for flush mounting, the unit has a 72mm built-in depth so it sits neatly within a standard stud or masonry wall cavity, leaving only the front face visible. At 515mm wide, 282mm high and 104mm deep overall, it's sized to fit typical domestic and light commercial consumer unit cutouts without modification. As a single-phase board built around a 100A main switch, it suits standard domestic and small commercial supplies.

Product Availability

This Hager Ltd part is marked obsolete and is no longer in active production. Stock is subject to availability, and buyers planning a first-fix or replacement installation should confirm current stock levels before specifying this Hager VMLF916C consumer unit on a job.

Key Features of the Hager VMLF916C Consumer Unit Include:

• Split Load Design Isolates Circuit Groups For Added Fault Resilience
• Two 100A 30mA RCCBs Deliver Earth Leakage Protection Across Both Circuit Banks
• 100A Main Switch Rated For Full Domestic And Light Commercial Loads
• Flush Mounted Steel Enclosure For A Discreet, Recessed Installation
• 72mm Built-In Depth Suits Standard Wall Cavity Dimensions
• IP2XC Rated Enclosure For Finger-Safe Protection Against Live Parts
• Single Phase Configuration Suitable For Standard Domestic Supplies
• Width: 515mm
• Height: 282mm
• Depth: 104mm
• Manufactured By Hager Ltd, A Recognised Name In Hager Electrical Distribution Equipment
• Status: Obsolete, Confirm Stock Availability Before Ordering

If you need some help, would like to take advantage of our Price Promise or have a large order to place, give our team of professionals a call on 0203 994 5470, drop us an email at sales@electricpoint.com or use our Contact Form.