Hager Flush Mount PIR Motion Detector White EEK510B

Hager EEK510B: Flush Mounted PIR Presence Detector with integral light sensor and 360° coverage.

Automatic Convenience & Energy Saving

This motion and light sensor combines PIR detection with a built-in photocell, so connected lighting only switches on when the room is occupied and ambient light falls below the set threshold. Factory presets take the guesswork out of commissioning: 400 Lux, a 20 minute time delay, and presence detection mode straight out of the box.

Flexible Detection Modes

Switch between presence and absence detection to suit the space. Presence mode automatically turns lighting on and off as people move in and out, while absence mode requires a manual switch-on but still saves energy by cutting lighting automatically once the room empties. A wall switch override is built in, so occupants retain manual control whenever it's needed.

Wide-Area Coverage

With a 360° horizontal detection angle, 7m frontal reach and 9m sideways reach, this movement detector light sensor is suited to open-plan offices, corridors, and communal areas. An optimum mounting height of 3.5m keeps detection consistent across the coverage zone, and the sensor handles a starting current of up to 16A for direct control of common lighting loads.

Simple Installation & Compliance

The flush mounted plastic housing fits neatly into a standard BESA box for a discreet finish in white (RAL 9010). Rated IP41, it's built for typical indoor installations, and the compact form factor means no cable is supplied, keeping first-fix wiring straightforward for the installer.

Key Features of the Hager EEK510B Include:

• Automatic Lighting Control Based On Occupancy, Reducing Energy Waste
• Integral Photocell (Light Sensor) Prevents Unnecessary Daytime Switching
• Wall Switch Override For Manual Control When Required
• Programmable For Presence Or Absence Detection Modes
• Factory Preset: 400 Lux, 20 Minute Time Delay, Presence Detection
• 360° Horizontal Detection Angle For Full Room Coverage
• Max Frontal Reach: 7m
• Max Sideways Reach: 9m
• Optimum Mounting Height: 3.5m
• Max Starting Current: 16A
• Supply Frequency: 50Hz
• Ingress Protection Rating: IP41
• Flush Mounted Plastic Housing In White (RAL 9010)
• Supplied Without Cable
• Manufactured In France

If you need some help, would like to take advantage of our Price Promise or have a large order to place, give our team of professionals a call on 0203 994 5470, drop us an email at sales@electricpoint.com or use our Contact Form.