Hager Type 1+2 SPD Kit for 400/630/800A JF Panelboards JF861SPD

Product Code JF861SPD

reviews

Available for Delivery only, change to Fast Delivery Service

£999.16

exc VAT

£1,198.99 : inc VAT

£1,198.99

inc VAT

£999.16 : exc VAT

  • BULK SAVINGS!
  • QTY Unit Price
  • 1-2 £999.16 £1,198.99
  • 3+ £986.98 £1,184.37

Qty:

Hager JF861SPD: Type 1+2 Surge Protection Device (SPD) kit for 400A, 630A and 800A JF Panelboards, combining a 25kA lightning impulse current rating with a 1.5kV voltage protection level (Up) in a single coordinated kit.

Safety & Reliability

This Hager circuit protection surge protection device (SPD) combines a Type 1 spark gap arrester with a Type 2 varistor arrester in one unit, so a single kit covers both direct lightning strikes and transient surges rather than requiring two separate devices. The 1.5kV voltage protection level and 50kA maximum discharge current (Imax, L-N(PEN)/N-PE) keep downstream equipment shielded from damaging spikes, while the integrated protection fuse removes the need for a separate backup fuse when specifying the installation.

Installation & Compliance

Built specifically for Hager's 400A, 630A and 800A JF panelboards, the kit is supplied with 25mm² copper cables for line and neutral plus a copper earth link, keeping conductor runs short so the protection level measured at the board (Up effective) stays close to the rated figure. It supports TN-S and TT earthing arrangements and helps installers meet the surge protection requirements of the 18th Edition of BS 7671.

Remote Monitoring & Status Indication

A built-in optical and mechanical indicator shows green when the device is healthy and red when a cartridge needs replacing, so condition can be confirmed with a glance during routine inspection. A floating remote signalling contact (rated 250V AC) allows the SPD status to be wired back to a BMS or alarm panel, flagging a fault remotely without a site visit.

Plug-In Maintenance

Each arrester cartridge is pluggable, so a damaged module can be swapped out without disturbing the fixed wiring or isolating the whole board. Screw and plug-in connections accommodate 2.5mm² to 35mm² conductors, with a specified tightening torque of 4.5Nm for secure, consistent terminations.

Key Features of the Hager Surge Protection Device (SPD) Kit JF861SPD Include:

  • Combined Type 1 + Type 2 Surge Protection In One Coordinated Kit
  • Low Voltage Protection Level (Up) Of 1.5kV Safeguards Sensitive Equipment
  • 25kA Lightning Impulse Current (Iimp 10/350µs) Per Phase
  • 50kA Maximum Discharge Current (Imax) L-N(PEN)/N-PE
  • Integrated Protection Fuse, No Separate Backup Fuse Required
  • Optical & Mechanical Status Indicator: Green = Healthy, Red = Replace
  • Floating Remote Signalling Contact For BMS & Alarm Integration
  • Pluggable Cartridges For Fast, Tool-Free Replacement
  • Compatible With TN-S & TT Earthing Systems
  • Designed For Hager 400A, 630A & 800A JF Panelboards
  • Screw & Plug-In Connections, 2.5mm² To 35mm² Conductors
  • Continuous Operating Voltage (Uc): 264V
  • Rated Operational Voltage (Ue): 240V
  • Operating Temperature Range: -40°C To +80°C
  • Ingress Protection Rating: IP20
  • Number Of Modules: 2 (1P)
  • Height: 100mm
  • Width: 230mm
  • Depth: 500mm
  • What's In The Box: 25mm² Neutral & Phase Cables, DIN Rail Bracket, Copper Earth Link, KBN381 Link, 3 x SPA180 & 1 x SPA180N Arresters
  • Compliance: IEC 61643-11, Supports 18th Edition BS7671
  • RoHS Compliant

If you need some help, would like to take advantage of our Price Promise or have a large order to place, give our team of professionals a call on 0203 994 5470, drop us an email at sales@electricpoint.com or use our Contact Form.

Model Number: JF861SPD
Brand: Hager
Range: Circuit Protection
Product Type: Surge Protection Device (SPD) Kit, Type 1+2
Max Discharge Current (Imax) L-N(PEN)/N-PE: 50kA
Lightning Impulse Current (Iimp 10/350µs) L-N(PEN)/N-PE: 25kA
Network Type: TN-S, TT
Type Of Connection: Screw Connection, Plug-In Connection
Remote Signalling Contact: Yes
Number Of Modules: 2
Voltage Protection Level (Up): 1.5kV
Continuous Operating Voltage (Uc): 264V
Rated Operational Voltage (Ue): 240V
Type Of Pole: 1P
Operating Temperature: -40°C to +80°C
Height: 100mm
Width: 230mm
Depth: 500mm
Indicator Lamp: Yes
Requirement Class (IEC 61643): T1, T2
Nominal Tightening Torque: 4.5Nm
Cross-Section (Screw Terminals): 2.5mm² to 35mm²
Cross-Section (Signal Contact): 0.14mm² to 5mm²
Frequency: 50Hz to 60Hz
Ingress Protection (IP) Rating: IP20
Integrated Protection Fuse: Yes
Short-Circuit Current Rating (Iscc R): 50kA
Mounting Type: DIN Rail, 35mm
Overvoltage Category: III
Degree Of Pollution: 2
RoHS Compliant: Yes

Recommended Products