Fusebox F3014DT 7+7 Dual Tariff 14 Way Consumer Unit 2x 100A Main Switch

FuseBox F3014DT is a 14 usable way dual tariff metal consumer unit with two 100A main switches, split 7/7 across two independently switched sections. It's a single, tidy board for properties with two supplies, such as Economy 7 or off-peak storage heating and water heating alongside a standard-rate supply.

Two Supplies, One Board

The F3014DT houses two separate supplies in one enclosure, each with its own 100A AC-22A main switch and 7 usable ways. Off-peak circuits such as storage heaters and immersion heaters can run from the economy supply, while lighting, sockets and other circuits stay on the standard supply. Each side can be isolated on its own. You don't need two separate consumer units, which saves wall space, time and cost on installs and replacements.

Robust 1mm Steel Enclosure

The enclosure is made from 1mm electro-galvanised steel with a smooth RAL 9001 powder-coated finish. It is built to EN 61439-3 for a durable, non-combustible installation, rated IP2XC and suitable for 230V, 50/60Hz supplies. The single-row 18 module layout measures 259mm x 378mm x 113mm, keeping both supplies on one compact board.

Installer-Friendly Features

Knockouts from 20mm to 40mm give flexible cable entry. There are 20mm and 32mm knockouts along the top and bottom, a 40mm knockout on each side, and two 90mm x 50mm rear cable entries for rear-fed installations. Terminal bars accept cables up to 16mm² at a 2.0Nm torque setting, and devices mount on a standard 35mm DIN rail. An accessory pack with circuit identification labels and grommet strip is included so the board can be finished and labelled straight away.

Key Features of the FuseBox F3 Series 14 Way Dual Tariff Consumer Unit F3014DT Include:

• Two Supplies In One Board – Ideal For Economy 7 & Off-Peak Heating
• Two 100A Main Switches For Independent Isolation Of Each Supply
• 14 Usable Ways Split 7/7 Between Supplies
• Saves The Space & Cost Of Fitting Two Separate Consumer Units
• Robust 1mm Electro-Galvanised Steel Enclosure
• Smooth RAL 9001 Powder-Coated Finish
• 20mm & 32mm Knockouts Top & Bottom, 40mm Knockout Each Side
• Two 90mm x 50mm Rear Cable Entries
• Accessory Pack Includes Circuit Identification Labels & Grommet Strip
• Main Switch Rating: 2 x 100A (AC-22A)
• Rated Voltage: 230V AC
• Frequency: 50/60Hz
• Maximum Terminal Bar Capacity: 16mm²
• Terminal Bar Torque: 2.0Nm
• Protection Degree: IP2XC
• 35mm DIN Rail Device Mounting
• Height: 259mm
• Width: 378mm
• Depth: 113mm
• Weight: 3.95kg
• Built To EN 61439-3
• UKCA & CE Marked, RoHS Compliant

If you just need some help, would like to take advantage of our Price Promise or perhaps have a large order to place give our team of professionals a call on 0203 994 5470, drop us an email at sales@electricpoint.com or use our Contact Form.