Hager 9 Way Consumer Unit 100A Switch Disconnector Incomer Type 2 SPD VME109SPD

Hager VME109SPD — 9 Way Hager Consumer Unit With SPD, 100A Switch Disconnector Incomer & Single Module Type II Surge Protection - replaces the now discontinued Hager VML108SPDRK

Hager VME109SPD is a 9 way consumer unit with SPD provision from the Design Evo range, built around a 100A double-pole switch disconnector incomer with a single module space reserved for a Type II surge protection device. As a Hager consumer unit with SPD built into the layout from the start, it gives contractors a straightforward, standards-compliant board for domestic and light commercial installs that need surge protection without going up a size.

One-Handed Fitting & Fast First Fix

Design Evo's fitting features come as standard on every board, including the VME109SPD. Smart lid locators hold the front cover in place automatically during final fix for true one-handed fitting, while retained, captive screws stay in the cover so nothing gets dropped or lost on site. Lid prop holes let you hold the lid open with a tool to label circuits hands-free, and an integrated spirit level built into the neutral bar gives a fast, tool-free check on horizontal alignment.

Round knockouts on the top, bottom and sides replace the old square cut-outs, so standard grommets, glands and entry plates fit straight away in a range of sizes. A rear cable protector plate guards cables from abrasion at the rear entry points, and a secure cable clamp firmly holds meter tails, reducing strain on terminals and freeing up hands during connection.

Compact Surge Protection Without A Separate Enclosure

The single module Type II SPD provision on this Hager consumer unit with surge protection uses Hager's patented SPD earth connection, which earths directly through the metal DIN rail bracket. That means no secondary fly-lead, no extra connection step, and no additional circuit-breaker needed in the SPD assembly — just fit the SPD module and go. It's a neater, faster way to add surge protection than retrofitting a separate SPD board alongside a standard consumer unit.

Quick-release DIN clips also mean a single device can be swapped without dismantling the whole busbar, so future call-backs and circuit changes on this board stay quick.

Safety & Compliance

The VME109SPD carries IP4X ingress protection and IK05 impact resistance, so it holds up against knocks and keeps live parts enclosed. It's built to Isolation Class I in a non-combustible steel enclosure, meeting the regulatory requirements for consumer units in domestic premises. A lockable lid with pre-cut facility accepts an optional lock barrel or padlock in place of the supplied bung with no drilling required, supporting instant Lockout/Tagout (LOTO) compliance on site.

The 116A rated incomer gives strong headroom above the standard domestic 100A supply, and torque settings are printed directly on compatible devices to support secure, inspection-ready connections.

Installation & Compliance

Suitable for indoor use only and designed for surface mounting, the VME109SPD is built to take Hager's Design Evo device and busbar system, keeping the whole board within one compliant range that supports full compliance with BS 7671:2018+A4:2026. British-made by Hager in Telford, Shropshire, and backed by Hager's UK-based technical support team.

Key Features of the Hager VME109SPD 9 Way Consumer Unit With SPD Include:

• 9 Way Hager Consumer Unit With SPD Provision Built In
• 100A Double-Pole Switch Disconnector Incomer Fitted As Standard
• Single Module Type II SPD Provision For Compact Surge Protection
• Patented SPD Earth Connection Through The DIN Rail Bracket – No Fly-Lead Or Extra Breaker Needed
• Smart Lid Locators For True One-Handed Fitting
• Retained, Captive Screws Can’t Be Dropped Or Lost On Site
• Integrated Spirit Level Built Into The Neutral Bar
• Round Knockouts Top, Bottom & Side For Flexible Cable Entry
• Rear Cable Protector Plate & Secure Cable Clamp For Tidy Terminations
• Quick-Release DIN Clips For Fast Device Swaps
• Lockable Lid With Pre-Cut Facility, Tool-Free LOTO Ready
• Non-Combustible Steel Construction To Isolation Class I
• IP4X Ingress Protection
• IK05 Impact Resistance For Site Durability
• Rated Current 116A
• Dimensions & Weight:
• Height: 240mm
• Width: 293mm
• Depth: 102.5mm
• Weight: 2.8kg

Hager Consumer Units
Hager MCB's
Hager RCBO's
Hager AFDD's

If you just need some help, would like to take advantage of our Price Promise or perhaps have a large order to place give our team of professionals a call on 0203 994 5470, drop us an email at sales@electricpoint.com or use our Contact Form.