INC202 Fusebox Modular Contactor 20A 2 Pole 230V Normally Open

FuseBox INC202 is a 20A 2-pole normally open (N/O) installation contactor with a 230V 50Hz coil, in a compact 18mm single-module DIN rail housing. It gives you reliable remote switching of domestic loads from consumer units and modular enclosures.

Reliable Load Switching

The INC202 lets a low-power control circuit, such as a timer or controller, switch a larger load safely. You don't have to run the full load current through the control device. It is rated 20A at AC-7a for small inductive domestic loads such as TVs, mixers and drills. It is rated 6.4A at AC-7b for rotating machines such as fans, central vacuum cleaners and washing machines. Both poles are normally open, so the load is isolated until the coil is energised.

Compact 18mm Design

At just 18mm wide, the INC202 takes up a single module. That leaves more space for protective devices and future circuits in the board. Its low 2.7VA holding power and 1.2W dissipation help keep heat build-up and running costs down in the enclosure. The contactor clips straight onto a 35mm top hat DIN rail, and its terminals take cables up to 4mm².

Safe, Compliant Installation

The INC202 is designed to fit FuseBox consumer units and modular enclosures and complies with IEC EN 61095. It has a rated insulation voltage of 500V and a 2.5kV impulse withstand rating. When it is fitted beside a protective device, install 9mm spacers on either side to let air circulate. Two spacers come free of charge, so you have everything you need for a cool, compliant installation. Both control and power terminals have a 0.8Nm torque setting, which makes secure, consistent connections straightforward.

Key Features of the FuseBox 20A 2 Pole N/O Installation Contactor INC202 Include:

• Switches Larger Loads Safely From A Low-Power Control Circuit
• 2 Normally Open (N/O) Poles – Load Isolated Until Coil Is Energised
• Compact 18mm Single-Module Width Saves Board Space
• Low 2.7VA Holding Power & 1.2W Dissipation Reduce Heat Build-Up
• Designed To Fit FuseBox Consumer Units & Modular Enclosures
• Quick Clip-On Mounting To 35mm Top Hat DIN Rail
• 2 x 9mm Heat Dissipation Spacers Supplied Free Of Charge
• AC-7a Rating: 20A (Small Inductive Domestic Loads)
• AC-7b Rating: 6.4A (Domestic Rotating Machines)
• Thermal Current (Ith): 20A
• Coil Voltage: 230V 50Hz
• Rated Operational Voltage: 250V AC
• Rated Insulation Voltage: 500V
• Rated Impulse Withstand Voltage: 2.5kV
• Maximum Cable Capacity: 4mm²
• Terminal Torque: 0.8Nm (Control & Power Circuits)
• Ambient Temperature: -5°C To +60°C
• IP20 Rated To EN 60529
• Width: 18mm
• Weight: 0.146kg
• Complies With IEC EN 61095
• UKCA & CE Marked, RoHS Compliant

If you just need some help, would like to take advantage of our Price Promise or perhaps have a large order to place give our team of professionals a call on 0203 994 5470, drop us an email at sales@electricpoint.com or use our Contact Form.