Spit Tapcon CSK Self Tapping Screw Countersunk Head Each

Spit Tapcon 058770 — 5x40mm CSK Concrete Screw Anchor For Cracked And Non-Cracked Concrete

The Spit Tapcon 058770 is a 5x40mm countersunk concrete screw anchor designed for fast, high-performance fixing into cracked and non-cracked concrete, as well as hollow concrete slabs. With a 35mm embedment depth and 5mm maximum fixture thickness, it delivers reliable holding power for lighter-duty brackets, cable tray and channels while keeping edge distances compact on site.

Fast, Clean Concrete Fixing

Tapcon concrete screws cut their own thread into a 5mm pre-drilled hole, so there are no plugs to fiddle with and no waiting around for resin to cure. Simply drill, blow out the dust and drive the anchor to the specified depth for a secure mechanical fix in a single operation. That makes them ideal for fast track installs and overhead work where speed and cleanliness matter.

Proven Performance In Cracked Concrete

ETA approval for use in cracked and non-cracked concrete means the 058770 anchor can be used with confidence in structural applications where the concrete may be under tension. Recommended working loads up to 0.6kN in tension and 2.5kN in shear (C20/25 concrete, single anchor, correct spacing/edge distances) give installers clear guidance on what each fixing can safely carry.

Installer-Friendly Geometry

With a minimum base material thickness of just 80mm, edge distance from 35mm and spacing from 35mm, Tapcon 5mm anchors are well suited to tight slab edges, soffits and beams. The zinc coated steel finish helps protect against corrosion, and the countersunk head sits flush with brackets or plates for a neat, snag-free finish once installed.

Typical Applications

Use the Spit Tapcon 058770 for fixing light channel, cable tray, small brackets, E-clips/cowhorn brackets and threaded rod hangers directly into concrete soffits and slabs. A consistent 8Nm tightening torque gives repeatable performance across the job.

Key Features of the Spit Tapcon 5x40mm Concrete Screw Anchor Include:

• Fast One Step Installation Into Concrete For Reduced Fixing Time On Site
• Suitable For Cracked And Non Cracked Concrete And Hollow Concrete Slabs For Versatile Use
• Countersunk Head Sits Flush With Brackets And Plates For A Neat Finish
• Recommended Tensile Working Load Up To 0.6kN In C20/25 Concrete For Light Duty Anchor Points
• Recommended Shear Working Load Up To 2.5kN In C20/25 Concrete For Lateral Loads
• Embedment Depth 35mm With 5mm Maximum Fixture Thickness For Typical Channel And Bracket Fixings
• Minimum Concrete Thickness 80mm With Compact Edge And Spacing Distances For Tight Soffits And Beams
• Zinc Coated Steel Construction For Added Corrosion Resistance In Dry Internal Environments
• Total Anchor Length 40mm With 5mm Drill Diameter For Simple Hole Preparation
• Tightening Torque 8Nm For Consistent Installation Quality Across Multiple Fixings

View All Self Tapping Screws

View All Spit 

If you just need some help, would like to take advantage of our Price Promise or perhaps have a large order to place give our team of professionals a call on 0203 994 5470, drop us an email at sales@electricpoint.com or use our Contact Form.